English
 |
| Quantity: | |
|---|---|
HMC800u
山东邦城科技有限公司
Technical parameters:
| Product model | unit | HMC800u |
| X-axis stroke (columns move left and right) | mm | 800 |
| Y-axis stroke (turning table moves back and forth) | mm | 1000 |
| Z-axis stroke (spindle box moves up and down) | mm | 900 |
| A-axis rotation range | -30°~+180° | |
| C-axis rotation range | 。 | 360° |
| Maximum workpiece rotation diameter | mm | 1100 |
| Distance between the spindle end face to the workbench end face (spindle vertical type) | mm | 150~1050 |
| Distance from the center of the spindle shaft to the center of the table rotation (spindle vertical) | mm | -200~800 |
| Distance from spindle axis to workbench surface (spindle horizontal) | mm | 50~950 |
| Distance from the spindle end face to the workbench rotation center (spindle horizontal) | mm | -100~900 |
| Workbench size | mm | 630×630 |
| Minimum indexing unit | 。 | 0.001 |
| Maximum load capacity of workbench | Kg | 1200 |
| Rotary speed | r/min | 11.1 |
| Maximum spindle speed | rpm | 18000 |
| Spindle inner bore tapered | HSK-A63 | |
| Spindle power | Kw | 30 |
| Spindle output torque distance | Nm | 72/85 |
| Speed | rpm | 60 |
| Rated torque | Nm | 1200 |
| Clamping system | Hydraulic | |
| Fast movement speed of X/Y/Z axis | m/min | 48 |
| Maximum feed speed of X/Y/Z axis | m/min | 20 |
| Tool magazine capacity | 45 | |
| Maximum tool diameter (full knife/air knife) | mm | 75/130 |
| Maximum tool length | mm | 350 |
| Maximum tool weight | kg | 8 |
| Linear axis positioning accuracy X/Y/Z | mm | 0.008/0.008/0.008 |
| Linear axis repeat positioning accuracy X/Y/Z | mm | 0.005/0.005/0.005 |
| Swivel shaft positioning accuracy | arc/sec | 8 |
| Repeat positioning accuracy of rotary shaft | arc/sec | 4 |
| model | SINUMERIK One | |
| Total control axes | Axes | 5 |
| Number of linkage control axes | Axes | 5 |
Technical parameters:
| Product model | unit | HMC800u |
| X-axis stroke (columns move left and right) | mm | 800 |
| Y-axis stroke (turning table moves back and forth) | mm | 1000 |
| Z-axis stroke (spindle box moves up and down) | mm | 900 |
| A-axis rotation range | -30°~+180° | |
| C-axis rotation range | 。 | 360° |
| Maximum workpiece rotation diameter | mm | 1100 |
| Distance between the spindle end face to the workbench end face (spindle vertical type) | mm | 150~1050 |
| Distance from the center of the spindle shaft to the center of the table rotation (spindle vertical) | mm | -200~800 |
| Distance from spindle axis to workbench surface (spindle horizontal) | mm | 50~950 |
| Distance from the spindle end face to the workbench rotation center (spindle horizontal) | mm | -100~900 |
| Workbench size | mm | 630×630 |
| Minimum indexing unit | 。 | 0.001 |
| Maximum load capacity of workbench | Kg | 1200 |
| Rotary speed | r/min | 11.1 |
| Maximum spindle speed | rpm | 18000 |
| Spindle inner bore tapered | HSK-A63 | |
| Spindle power | Kw | 30 |
| Spindle output torque distance | Nm | 72/85 |
| Speed | rpm | 60 |
| Rated torque | Nm | 1200 |
| Clamping system | Hydraulic | |
| Fast movement speed of X/Y/Z axis | m/min | 48 |
| Maximum feed speed of X/Y/Z axis | m/min | 20 |
| Tool magazine capacity | 45 | |
| Maximum tool diameter (full knife/air knife) | mm | 75/130 |
| Maximum tool length | mm | 350 |
| Maximum tool weight | kg | 8 |
| Linear axis positioning accuracy X/Y/Z | mm | 0.008/0.008/0.008 |
| Linear axis repeat positioning accuracy X/Y/Z | mm | 0.005/0.005/0.005 |
| Swivel shaft positioning accuracy | arc/sec | 8 |
| Repeat positioning accuracy of rotary shaft | arc/sec | 4 |
| model | SINUMERIK One | |
| Total control axes | Axes | 5 |
| Number of linkage control axes | Axes | 5 |
| Name | Introduction | Size | Category | Thumbnail | Copy Link | Download |
|---|---|---|---|---|---|---|
| Bangcheng pdf test page.pdf | 50.46MB |  | Copy Link | Download |
